I been wanting to create some Acrylic Pour Coasters for a while. I purchased 4″ wood tiles from Michael’s and they traveled with me in my car for several months before a was able to work on them.
First, I applied white Gesso to both sides of the wood tile. I mixed the paint in squeeze bottles. The colors I used were pink, purple, grayish blue, light pink, light purple, green and white. I love pinks and blues.
I let the tiles cure for about a month while I was out of town again. I cleaned the tiles with a mixture of Dawn and water, which I keep in a spray bottle. A few weeks later when I got up the courage to apply resin, I poured resin over the coasters.
The tiles did not come out perfect, but it wasn’t a failure either. The tray to hold the tiles was purchased from Hobby Lobby. I stained the inside of the box and two sides. The other two sides I applied Gesso and did a pour on the sides.
I did not pour the inside of the tray, instead I cut out some white polymer clay and did a pour on top of the clay when I poured the tray sides. After I cleaned the tray, I glued the clay to the bottom and applied several coats of varnish.
I glued cork to the back of each coaster using wood glue. Below are the results.