Acrylic Pour Coaster

I been wanting to create some Acrylic Pour Coasters for a while.  I purchased 4″ wood tiles from Michael’s and they traveled with me in my car for several months before a was able to work on them.

First, I applied white Gesso to both sides of the wood tile.   I mixed the paint in squeeze bottles.  The colors I used were pink, purple, grayish blue, light pink, light purple, green and white.  I love pinks and blues.

I let the tiles cure for about a month while I was out of town again. I cleaned the tiles with a mixture of Dawn and water, which I keep in a spray bottle.  A few weeks later when I got up the courage to apply resin, I poured resin over the coasters.

The tiles did not come out perfect, but it wasn’t a failure either.  The tray to hold the tiles was purchased from Hobby Lobby.  I stained the inside of the box and two sides.  The other two sides I applied Gesso and did a pour on the sides. 

I did not pour the inside of the tray, instead I cut out some white polymer clay and did a pour on top of the clay when I poured the tray sides.  After I cleaned the tray, I glued the clay to the bottom and applied several coats of varnish.

I glued cork to the back of each coaster using wood glue.  Below are the results.

Tissue Box

I saw a some videos on fluid painting and pour painting.  Just watching the videos is mesmerizing, and the results are beautiful.  I decided to try it out.  But, I did not have any fluid to add to paint to get it to flow.  All I had was the acrylic paint that comes in the 2oz bottles.  I use a trash bag and painter tapes to tape off each side that I would not be painting.   I used metallic acrylic paint.   Letting each side cure overnight.  It took days to finished.  The outcome was impressive.

DSCN6692DSCN6694DSCN6695DSCN6691

Now, I trying to decide if I should do a pour on the inside of the tissue box, or just leave it like it is.

Jewelry Box

In August 2016, my parents house flooded.  They had 44 inches of water in their home and they lost most of their belonging.  For Christmas I stained and put mosaic on a jewelry box for my mother.

dscn2763

The box was purchased from Hobby Lobby.  The mosaics was done with polymer clay, and for the grout I used glue and micro beads.

dscn2765

dscn2773

dscn2776

Several coats of polyurethane was placed over every surface, including the mosaic.

The Box Project

I found this box at Hobby Lobby and I had to finish it.  I decided to stain and varnish the box and for the cut out, to use chalk paint.  Since I never used chalk paint, I decided I needed a test piece to determine if I wanted an antique finished.

This is the test piece with the same chalk color and an antique finished.

DSCN8796
Needless to say, I did not go with an antique finish.

The box frame was stain in dark walnut and varnish with a clear gloss.  The cutout was stained in ebony.

DSCN8773

DSCN8774

I painted the inside of the lid to match the outside.

DSCN8779

To finish off the box, I decide to put a mosaic pattern on the inside of the box that match, not exactly, the cover of the box.  The mosaic tiles were made from polymer clay.  For the grout I used gold puff paint, a.k.a. fabric paint.

DSCN8788

The filler mosaic is a black, brown, turquoise, gold combination.  Since I had a lot of extra clay, I decide to use them on the test cross piece.  This is the final result.

DSCN8789