This is the Passenger Car in my Train Series.
The wheel assemble was printed with the side shown on printer plate, which provided for the smooth finish. I designed little lanterns and put them by the door on both ends of the car.
I designed the seating without the arm rails because I believed it may have been too delicate to provide a good result.
The train is now longer then the white cutter where I took the previous pictures. Soon, it will be too long for the shelf it is sitting on. But, the wheels are spinning and the locking devices are functioning.
Object Size (W, D, H): 27.75, 146.43, 56 mm
I made the Passenger Car slightly longer than the Caboose. The extra width was due to the roof over hang.
Sarah Cath's Adventures 
Cant Donwload Anymore and Really need this for a Christmas present please!!!!
same thing with the coal car
A few years ago, Tinkercad had a major update to their system. I saved all the original designs into their newer file format and made the original ones private. I updated the links on this website so you should be able to download them. You can also try these links: Coal Car – https://www.tinkercad.com/things/1TdcYLz6Yhd-coal-car-v2; Passenger Car – https://www.tinkercad.com/things/ayIZVL447Fd-passenger-car-v2; Caboose – https://www.tinkercad.com/things/6mtV0UoeiQN-caboose-v2; Engine: – https://www.tinkercad.com/things/0F0xaBIjp1F-train-engine
That you you are the best I am so excited to expand on my train collection!!!
Also Question can I sell these at my school store? I work as a PBIS Coach there and was wondering if I could sell these to students for their Points that they get for being good in class.
Yes, All I would ask if you tagged them, or give out a card with them that says something to the effect “Made with Tinkercad by Sarahcath” you can even put you name on it printed by…. If may help to get the students interested in 3d design.