As I mention in the previous posting, the first couple attempts on printing the Ultimaker Robot, did not go well until I figured the filament grinding issue. The printing of this little guy when smoothly.
After the print is done, it is necessary for the printer to cool. I have learned that even after the printer has indicated it has cooled down, if you let the object sit there longer, it is easier to remove.
The finish robot:
Print Time: 50 minutes
Filament: PLA – 0.47 meters
Layer height: 0.1 mm
Shell Thickness: 0.8
Object Size (W, D, H): 25.9, 15.0, 33.8 mm