My latest 3D project was to print a sphere with the Seed of Life Design on in. I created it in Tinkercad; Seed of Life. On the bottom of the object I left a 12 mm hole for a LED light.
It took me numerous attempts to get it printed. Finally, I had to add supports to the sphere in Cura, the 3d slicing program, to get it to adhere to the plate. Approximately 10 hours in to the 13 hours print, I noticed the translucent filament that the printer was using was about to run out. I therefore replaced the filament with white.
Here is the final result. The printer obviously needs some more adjusting.
After I put the light in the bottom of the sphere, it look so good I made a video. The video is posted on YouTube. Seed of Life Video
Here are some pictures with the LED light.
I posted the STL file on Youmagine for anyone to download.
4 thoughts on “Seed of Life”
Good work 👏
Does that ever look nice with the LED lights!
Better with the light.